In Case Of Failure - Sopro 617 Manuel D'utilisation

10.2. IN CASE OF FAILURE

PROBLEMS
With a video monitor With a video monitor
No image displays on the
screen and the camera
LEDs are not on.
The camera switches on,
but no image displays on
the screen.
An image displays on the
screen, but the quality is
not satisfactory.
An image displays, but it is
not really clear (blurry)
With a computer
With a computer
No image displays on the
screen and the camera
LEDs are not on.
The camera switches on,
but no image displays on
the screen.
An image displays on the
screen, but the quality is
not satisfactory.
An image displays, but it is
not very clear (blurry)
E N G L I S H
CAUSES
• Defective power supply.
• Connection problem.
• Defective monitor power
supply.
• Connection problem.
• Monitor configuration.
• Hygienic protector.
• Defective power supply.
• Connection problem.
• Configuration.
• Driver.
• Connection problem.
• Camera driver
configuration.
• Hygienic protector.
SOLUTIONS
1. Check the power supply is correctly connected to
the network and to the connection box.
2. Check the connecting cable is correctly connected
to the handpiece and to the connection box.
1. Check the video cable is correctly connected to the
monitor and to the connection box.
2. Check the monitor is switched on.
Check the video monitor configuration is correctly set
up (brightness, contrast, saturation, etc.)
Check the hygienic protector is correctly positioned on
the camera head.
1. Check the power supply is correctly connected to
the network and to the connection box.
2. Check the connecting cable is correctly connected
to the handpiece and to the connection box.
1. Check the camera is correctly set up in SOPRO
Imaging (please, refer to SOPRO Imaging owner's
manual).
2. Check the camera is correctly detected in the
device driver (correct installation of its driver).
3. Check the USB cable coming from the DOCK is
correctly connected to the HUB.
Check the camera configuration in the SOPRO Imaging
software (brightness, contrast, saturation, etc.).
Please refer to SOPRO Imaging owner's manual.
Check the hygienic protector is correctly positioned on
the camera head.
S o p r o 6 1 7 • U s e r m a n u a l
21