VESTEL VHUE60DX Mode D'emploi page 49

To install the product:
1. Make sure that the power cable is disconnected from the wall socket.
2. Remove the cover on the back of the cooker hood with the hammer.
3. Determine the position of the four holes on the wall. NOTICE The minimum
distance between the supporting surface of the cooking appliance and the
lowest part of the cooker hood must be:
a. Gas cookers:
b. Electric cookers:
c. Coal or oil cookers:
4. Drill the four holes in the wall with the 8mm drill.
5. Insert the four wall plugs.
6. Place two ST4 x 30mm screws in the two upper wall plugs.
7. Put the cooker hood on the two screws.
8. Use the other two ST4 x 30mm screws to attach the cooker hood to the wall.
Tighten the screws.
9. Connect the power plug to an earthed wall socket.
49 | VESTEL VHUE60DX
70 cm
70 cm
80 cm