Displaying Stored Results; Deleting Measurements From The Memory - AEG BMG 5612 Mode D'emploi

7. DISPLAYING STORED RESULTS

a) In Clock Mode, press "MEM" button to display the stored results. The memory
bank and the amount of results in this bank will be displayed. Press "START"
button to change over to other bank. Confirm your selection by pressing "MEM"
button. The current bank can also be confirmed automatically after 5 seconds
with no operation. See Fig. 7.
b) After selecting the memory bank, the average of the last three measurements is
displayed on the LCD. The symbol of "A" (Average) appears. See Fig. 7-1.
c) Press "MEM" button, the last result will be displayed with date and time. Irregular
heartbeat symbol (if any) and the indicator of blood pressure classification will
blink at the same time. See Fig. 7-2. Press "MEM" button repeatedly to review
the results measured previously. See Fig. 7-3.
d) When displaying the stored results, the monitor will turn off automatically after 2
minutes of no operation. You can also press the button "START" to turn off the
monitor manually.

8. DELETING MEASUREMENTS FROM THE MEMORY

When any result (except average reading of the last three results) is displayed and
you keeping pressing the "MEM" button for three seconds, all results in the current
memory bank will be deleted after three "beeps". See Fig. 8 and Fig. 8-1. The unit is
switched off when you press the "MEM" or the "START" button.
Fig. 7 Fig. 7-1
Fig. 7-2 Fig. 7-3
English
89