Cleaning - ProfiCare PC-PHE 3092 Mode D'emploi

NOTE:
• To prevent the skin from cracking, use a skin cream after treatment.
• After about 7 to 10 days you should achieve good results. Normally, 1 to 2
applications per week should suffice thereafter.
Replacing the Polishing Head
Delivery includes 2 grinding heads with assorted rollers.
• For badly keratinised areas, select the grinding head with the coarse roller.
• The grinding head with the fine roller is intended for normally keratinised areas.
WARNING:
Always turn the appliance off before removing the grinding head.
1. In order to clean or replace the polishing head, press
button (3).
2. The polishing head can then be removed easily.
3. Applying slight pressure will help the cleaned or replaced
polishing head to lock into place.
On / Off Switch
Use the lock (4) to prevent the appliance from being accidentally switched on.
1. Check the polishing head once again for secure installation before using it.
2. Press the lock to slide the switch to the I or 0 position.
CAUTION:
• Do not immerse the appliance in water. This could destroy the electronics.
• Do not use sharp or abrasive cleaning agents.
1. Switch off the appliance before cleaning.
2. You may wipe the housing of the appliance with a slightly damp cloth.
50
PC-PHE3092_IM

Cleaning

26.03.21