General Information; Operation And Controls; Before Using For The First Time - Princess Single Cooking Plate Mode D'emploi

General information

This instruction manual contains
information concerning two attractive
electric hotplates: the Single Cooking Plate
and the Double Cooking Plate.
The Single Cooking Plate has one
1,500 Watt hotplate with a diameter of
18.5 cm.
The Double Cooking Plate has two
hotplates: one 1,500 Watt hotplate with a
diameter of 18.5 cm and one 750 Watt
hotplate with a diameter of 15.5 cm.
Each hotplate has its own temperature-
control dial.
Operation and
controls
See figure 1.
Both models consist of the following:
1 Hotplate (diameter of 18.5 cm)
2 Hotplate (diameter of 15.5 cm, only the
Double Cooking Plate)
3 Power cord and plug
4 Handle (both left and right)
5 Temperature-control dial
6 On/Off indicator light for the heating
element
7 Housing

Before using for the first time

1 Remove all the packaging materials
and stickers from the appliance.
2 Place the appliance on a stable, flat
surface at working height near an
earthed plug socket. Make sure the
appliance is at least 5 cm from any
objects. Do not place the appliance (too
close) under kitchen cupboards.
The bottom of the appliance will also
get somewhat hot. Use a heat-resistant
(non-flammable) table mat if you are in
doubt as to whether the surface is able
to withstand the heat.
3 Make sure the temperature-control dial
is set to 'Min' and nothing is placed on
the hotplate (for the Double Cooking
Plate, this and the following steps apply
to both hotplates).
4 Insert the plug into the plug socket.
5 Rotate the temperature-control dial
clockwise to 'Max'. The hotplate's
indicator light will be lit. The indicator
light will go on and off once the hotplate
has reached the set temperature.
6 Allow the hotplate to continue heating
up for 10 minutes.
The appliance may emit a little smoke
and a characteristic smell when you
switch it on for the first time. This is
normal and will soon stop. Make sure
the appliance has sufficient ventilation.
7 Rotate the temperature-control dial
anticlockwise to 'Min'. The hotplate's
indicator light should no longer be lit.
8 Allow the hotplate to cool down and
remove the plug from the plug socket.
If you wish, you may now use the
appliance (see 'Use').
Cooking Plate Article 302201/302202
5