Specifications; Informations - PAMI TEL150 Manuel Utilisateur

SPECIFICATIONS

Inputs Connector
Stereo audio
CINCH
line
Mono audio
CINCH
line
Téléphone line
Outputs Connector
Correspondent
CINCH
only
Mixing of
CINCH
send ad return
Power supply : 230 Volts + / - 10 %
Dimensions : Rack 1 unité / 1 unit Rack
483 x 44 x 100 mm
Weight : 2,4 kg
RFI protections on all audio inputs/outputs, remote control input and mains input.
INFORMATION
Warning
TEL 150 mains connector has three wires (2 poles + earth). Earth should imperatively be connected to
mains earth.
Never use this equipement without proper grounding.

Check quality of grounding.

Should noise or hum occurs when connected to other equipments, never disconnect grounding, use

insulating transformer on mains.
Never open the case without disconnecting mains

Avoid high temperature exposure.

Never expose the equipment to rain, snow or moisture.

TEL 150 complies with :
EN60065, EN55013, EN55020, EN60555-2, et EN60555-3, according to 73/23/EEC, 89/336/EEC
and 93/68/EEC
Rami
Type
Unbalanced
Unbalanced
Balanced
RJ 11
Type
Unbalanced
Unbalanced
Impedance
Sensitivity
/
3,9 kOhms
2,2 kOhms -18 dBu / 98 m V
1,2 kOhms -26 dBu / 39 m V
Impedance
Nominal level
220 Ohms 0 dBu / 0.775 V
100 Ohms 0 dBu / 0.775 V
50 / 60 Hz
18
Nom. level Distorsion
0 dBu / 0.775 V +22 dBu / 9.75 V
0 dBu / 0.775 V +26 dBu / 15.5 V
-10 dBu / 0.25 m V +23 dBu / 11 V
Maximum level
+20 dBu / 7.75 V
+20 dBu / 7.75 V
TEL150