• This heated overblanket may only be used in conjunction with
the control specified on the label.
• This heated overblanket must only be connected to the mains
voltage that is specified on the label.
• The electrical and magnetic fields emitted by this heated
overblanket may interfere with the function of a pacemaker.
However, they are still well below the limits: electrical field
strength: max. 5000 V/m, magnetic field strength: max. 80 A/m,
magnetic flux density: max. 0.1 millitesla. Please therefore consult
your doctor and the manufacturer of your pacemaker before
using this heated overblanket.
• Do not pull, twist or make sharp bends in the cables.
• If they are not positioned properly, there may be a risk of
becoming entangled in, being strangled by, tripping over, or
stepping on the cable and control of the heated overblanket.
The user must ensure that excess lengths of cable, and cables in
general, are safely routed.
• Please check this heated overblanket frequently for signs of wear
and tear or damage. If any such signs are evident, if the heated
overblanket has been used incorrectly or if it no longer heats up,
it must be checked by the manufacturer before being switched
on again.
• Under no circumstances should you open or repair the heated
overblanket (including the accessories) yourself because faultless
functionality can no longer be guaranteed thereafter. Failure to
observe this will invalidate the warranty.
• The appliance may not be used with an external timer
or a separate remote control.
• If the mains connection cable of this heated overblanket is
damaged, it must be disposed of. If it cannot be removed, the
heated overblanket must be disposed of.
• When this heated overblanket is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
• The electronic components in the control warm up when the
heated overblanket is in use. For this reason, the control must
never be covered or placed on the heated overblanket when it is
in use.
• It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
15 • EN