Snapshot - Odys Slim X5 Manuel D'utilisation

4.3.2

Snapshot

Press the On/Off button to switch the camera on.
1
Select single
shot mode
When the camera is
switched on, it is automa-
tically in still photograph
mode. If this is not the
case, press the
mode button to select the
photography mode. Photo-
graphy mode is active
when the
appears in the upper
corner of the LCD display.
2
Zooming in or out digitally
Use the LCD to frame the image and press the up button to
zoom in or the down button to zoom out.
3
LCD
You can now view the image
on the LCD. The meaning of
the status symbols shown on
the LCD is explained in the
table on page 11.
4
Taking a photograph
Press the shutter release down fully to take a photgraph.
A sound signals that the photograph has been taken.
12
symbol
Photo/configuration
mode button