Auxiliary Input - Jensen JMS2212 Guide D'installation Et D'operation

System Menu
1. Press and hold the PTY/CAT/MENU button (21) for more than 2 seconds to enter the sys-
tem menu. The first menu item, "Key Beep", will appear on the display.
2. Press the VOL +/- buttons (17, 16) repeatedly to navigate the system menu.
3. Press the INFO/ENTER button (14) to adjust the highlighted menu item.
4. Press the PTY/CAT/MENU button to exit the system menu.
The following items can be adjusted:
• Key Beep (Click / Beep / Off): Turn the audible beep On/Off (heard when functions/
buttons are selected).
• LCD Backlight (1-10): Adjust LCD brightness.
• LCD Contrast (1-10): Adjust LCD contrast.
• Tuning Region (USA / EUROPE): Set frequency spacing for various regions.
• Preset-Only Tuning (On / Off)
• SIRIUS Satellite Radio (only appears when SIRIUS tuner is connected and in SIRIUS
mode)
• Clear Skipped Channels (Yes / No)
• Skipped Channels: List of Channels (Skipped / Visible)
• Set Lock Code: _ _ _ _
• Locked Channels: List of Channels (Locked / Unlocked)
• Enable Song Seek (Yes / No)
• Edit Favorite Songs: List of Favorite Songs (Enable / Disable / Delete)
• iPod Auto-Select (On / Off): Choose "On" to automatically detect and playback iPod when
connected or "Off" to use the MODE button (8) to select the iPod source.
• Rear Aux Enable (On / Off): Turn on to allow the use of auxiliary audio input at the rear of
the radio chassis.
• Battery Alarm (Off / On): When On, if the battery supply voltage drops below 10.8V,
indicating a possible problem with the vessel's battery charging system, the radio will
issue a low battery display warning and an audio beep once per minute. The warning and
sound will continue until the unit is turned off or the voltage is restored to more than 10.8
Volts.
• Battery Auto-Off (Off / On)
• Reset To Defaults <ENTER>: Press the INFO/ENTER button (14) to return the JMS2212
to factory default set up values.
• Update Firmware <ENTER>: Press the INFO/ENTER button (14) to apply recent software
updates.
Equalizer
Press the EQ/LOUD button (19) to choose one of the following pre-defined bass and treble
curves: USER > FLAT > ROCK > CLASSICAL > POP.
Loudness
Press and hold the EQ/LOUD button (19) to toggle loudness on/off. When listening to music at
low volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the AUX IN cables on the back of the radio.
2. Press the MODE button (8) to select "Auxiliary" mode.
3. Press MODE again to exit "Auxiliary" mode and access another mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel (1).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the numbers on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.
Scroll
When the information is too long to be displayed on the LCD, press and hold the DISP/
SCROLL button (12) to view the entire title. The information will scroll twice and then return to
abbreviated text.
6
JMS2212