Teac UD-701N Mode D'emploi page 17

Playback format information screen
Press the INFO button on the remote control during playback to show
playback format information.
o The input signal and playback signal displays will be the same
when the upconversion setting is "OFF".
Example when the playback source is USB, COAX1, COAX2,
OPT1 or OPT2 (using 8× Fs upconversion)
Input signal format
PCM
44. 1kHz
Input signal sampling
frequency
Example when the playback source is NET or Bluetooth
(using 4× Fs upconversion)
Codec
LDAC
48kHz
Input signal sampling
frequency
Volume display
Two types of volume can be shown: STEP and dB.
This is set by the VOLUME TYPE setting (page 24).
The volume setting shown will be enlarged when you turn this unit's
VOLUME knob.
VOLUME TYPE set to "STEP (0-100)"
Display example
VOL.
The maximum volume level is 100 and the minimum level is 0.
Before connecting headphones, set the VOLUME knob to its mini-
mum value (0). Failure to do so might cause sudden loud noises,
which could damage headphones, harm hearing or result in other
trouble.
VOLUME TYPE set to "dB"
Display example
VOL.
The maximum volume level is +24 dB and the minimum level
is −∞ dB (negative infinity). Before connecting headphones, set
the VOLUME knob to its minimum value (−∞ dB). Failure to do
so might cause sudden loud noises, which could damage head-
phones, harm hearing or result in other trouble.
Playback signal format
PCM
352.8kHz
Playback sampling
frequency
Playback signal format
PCM
192kHz
Playback sampling
frequency
36
-62
.0dB
The set output level is shown when LINE OUT LEVEL is set to "FIXED
0dB" or "FIXED +6dB".
Example when VOLUME TYPE set to "dB"
USB
o If VOLUME TYPE is set to "STEP (0-100)", "VOL. 86" will be shown
when set to "FIXED 0dB" and "VOL. 90" will be shown when set to
"FIXED +6dB".
When LINE OUT LEVEL is set to "OFF", "VOL. 0" or "−∞ dB" will be
shown.
Example when VOLUME TYPE set to "dB"
USB
When LINE OUT LEVEL is set to FIXED or OFF
Turning the VOLUME knob will cause the following to be displayed.
LINE OUT LEVEL set to FIXED
VOL.
LINE OUT LEVEL set to OFF
VOL.
+ 0.0
dB
− ∞
dB
FIXED
OFF
17
EN