Replacing The Batteries; Bluetooth Pairing - König CSBTSPTWR100BL Manuel De L'utilisateur

CSBTSPTWR100BL
Wireless tower speaker
Description
Front panel (fig. A1)
1. Display
2. On/off button
Play/pause button
3. Volume + button
Next button
4. Volume - button
Previous button
5. Mode button
6. Scan button
Sleep button
7. USB input
8. Memory card slot (SD)
Rear panel (fig. A2)
9. DC input
10. Audio input
11. FM antenna
Remote control (fig. B)
12. On/standby button
13. Play/pause button
14. Mute button
15. Volume + button
16. Volume - button
• Press and hold the button
to switch on or off the
device.
• Press the button to start or
pause the audio playback.
• Press and hold the button
to increase the volume.
• Press the button to play the
next track.
• Press and hold the button
to decrease the volume.
• Press the button to play the
previous track.
• Press the button to set the
source: FM / AUX / USB / SD/
MMC / Bluetooth.
• FM mode: Press and hold
the button to search FM
channels automatically.
• Press the button to enter
sleep mode: Off, 30, 60, 90,
120 minutes.
• Connect a USB device to the
USB input.
• Insert a memory card into
the memory card slot.
• Connect the power adapter
to the DC input.
• Connect the mains cable to
the mains.
• FM: Connect an RCA cable
to the audio input.
• AUX: Connect an audio
device to the audio input
using an auxiliary cable.
• Press the button to switch
on the device or set the
device to standby mode.
• Press the button to start or
pause the audio playback.
• Press the button to mute or
unmute the sound.
• Press the button to increase
the volume.
• Press the button to
decrease the volume.
3 3
17. Next button
18. Previous button
19. FM button
20. AUX button
21. USB/SD button
22. Bluetooth button
23. Scan button
Sleep button
24. Search + button
Search - button
25. Reset button
Installation (fig. C)
• Refer to the illustration to install the device.

Replacing the batteries

The remote control is powered with one lithium
battery (CR2032).
• Open the battery compartment.
• Insert the battery into the battery compartment.
• Close the battery compartment.

Bluetooth pairing

1. Switch on the device.
2. Set the source to Bluetooth.
3. Activate Bluetooth on your Bluetooth device.
4. Search for new devices on the Bluetooth
device.
5. Select the device: "CSBTSPTWR100BL".
If necessary, confirm with the PIN: "0000".
The Bluetooth device will confirm when the
pairing is completed.
English
• Press the button to play the
next track.
• Press the button to play the
previous track.
• Press the button to set the
source to FM.
• Press the button to set the
source to audio input.
• Press the button to set the
source to USB or SD.
• Press the button to set the
source to Bluetooth.
• FM mode: Press and hold
the button to search FM
channels automatically.
• Press the button to enter
sleep mode: Off, 30, 60, 90,
120 minutes.
• FM mode: Press and hold
one of the buttons to enter
manual channel search
mode.
• FM mode: Press and hold
the buttons to search FM
channels manually.
• Press the button to reset
the device to the default
settings.