INSTRUCTIONS FOR THE INSTALLER
THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED PERSONNEL
EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE.
THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE,
ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS.
Installing the top
The appliance is designed to be embedded into
heat-resistant pieces of furniture.
The walls of the pieces of furniture must resist a
temperature of 65°C besides the room one.
The appliance is of type "Y", or it can be installed
with one side wall to the right or left of the hob.
The equipment must not be installed near
inflammable materials, such as curtains, cloths,
etc.
Make an opening in the table top of the
dimensions shown in fig.3 so that there is a
distance of at least 50 mm from the rear edge
of the installed appliance and 100 mm from the
adjacent side walls.
MODEL
290
600 - 700
900
IMPORTANT NOTICE
L
P
270
480
550
480
755
480
3
Any possible wall unit over the cook-top must be
placed at a distance of at least 760 mm from the
top.
It is advisable to isolate the appliance from the
piece of furniture below with a separator, leaving a
depression space of at least 10 mm (fig. 4).
18
4