glemgas GTV955HBK Mode D'emploi page 17

INSTRUCTIONS FOR THE USER
CLEANING
Before any operation, disconnect the appliance
from the electric grid. Don't use a steam
cleaner for the cleaning the hob.
It is advisable to clean the appliance when it is
cold.
Glass platform and enamelled parts
The glass platform and all of the enamelled parts
must be washed with a sponge and soapy water
or with a light detergent.
Do not use abrasive or corrosive products.
Do not leave substances, such as lemon or tomato
juice, salt water, vinegar, coffee and milk on the
enamelled surfaces for a long time.
Directive 2012/19 / EU (WEEE).
This informative note is addressed exclusively to owners of devices that present the
symbol of Fig. A in the adhesive label showing the technical data applied on the product
itself (matricular label): This symbol indicates that the product is classified according to
current regulations, as electrical or electronic equipment and e Complies with
Directive 2012/19 / EU (WEEE) therefore, at the end of its own useful life, must be
treated separately from household waste, delivering it for free at a separate collection
point for equipment electrical and electronic products or returning it to the dealer when buying a new
equivalent device.
The user is responsible for placing the appliance at the end of its life at the appropriate collection facilities,
under penalty of the penalties provided for by the current waste legislation.
Appropriate separate waste collection for the subsequent start-up of the disposed appliance to recycling,
treatment and environmentally compatible disposal helps to avoid possible negative effects on the
environment and on health and favors the recycling of the materials of which the product is composed.
For more detailed information regarding the collection systems available, contact the local waste disposal
service, or the store where the purchase was made.
Manufacturers and importers comply with their responsibility for environmentally compatible recycling,
treatment and disposal either directly or by participating in a collective scheme.
Burners and racks
These parts can be removed to make cleaning
easier.
The burners must be washed with a sponge and
soapy water or with a light detergent, wiped well
and placed in their housing perfectly. Make sure
that the flame-dividing ducts are not clogged.
Check that the feeler of the safety valve and the
start-up electrode are always perfectly cleaned, so
as to ensure an optimum operation.
Gas taps
The possible lubrication of the taps must be carried
out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas
taps, apply to the Customer Service.
17
Fig.A