Domo DO498BL Mode D'emploi page 42

DO498BL
PARTS
1.
Lid
2. Control panel
3. Jug
4. Power socket
5. Overfill sensor
6. Blade
7. Indication smooth-function
8. Indication chunky-function
9. Indication blend-function
10. Setting button
11. Start button
USE
1. Ensure the soup maker is unplugged before adding the ingredients.
2. Remove the lid. Be careful not to touch the blade.
3. Place all the ingredients in the soup maker.
4. Add the water or broth last, filling it up to between the min and max indication
lines.
5. Place the lid back onto the jug. Ensure it is securely in place.
6. Plug the cable in the power socket at the bottom of the handle. The indicator
lights will blink one by one.
7. Select the required program (smooth/chunky/blend) by pressing the setting
button. Confirm with the start button. Attention: the jug will heat up.
8. When finished you will hear an end signal. Switch off the appliance by removing
the plug. Be careful when pouring the soup.
SETTINGS
Smooth: heat + mix
The smooth-function is perfect for a soup with a smooth consistency.
The program lasts for approximately 20 minutes. The program ensures the ingredients
are blended to the right consistency and gently cooked at the right temperature.
At first the appliance will start heating, en the vegetables will be cooked. After 11
1
3
42
2
10
7 8 9
5
6
4
11