Gearwrench 88721 Manuel D'emploi

Instruction Manual & Product Warnings
Manuel d'emploi et avertissements sur le produit pour la pièce GEARWRENCH
Manual de instrucciones y advertencias del producto de las piezas GEARWRENCH:
88721 - Tether Self Sealing Tape
88722 - Tether Self Sealing Tape, Long
88751 - Dual D Ring Web Tether 2-1/4", 10PC
88752 - D Ring Web Tether 2-1/4", 10PC
88753 - D Ring Web Tether 3-1/2", 10PC
GEARWRENCH D-Ring Web Tethers are only intended for use as part of a tool tethering system, and installed on tools as part of a
tether connection point. GEARWRENCH D-Ring Web Tethers are NOT a 1 step tethering solution. GEARWRENCH D-Ring Web Tethers
should always be secured to a tool with self sealing tether tape and follow proper installation instruction.
GEARWRENCH Self Sealing Tape is only intended to be used as part of a tool tethering system and installed on tools as part of a
tether connection point. GEARWRENCH Self Sealing Tape is NOT a 1 step tethering solution. GEARWRENCH Self Sealing Tether Tape
should only be used to secure a tether connection point and only installed following proper installation instructions.
GEARWRENCH D-Ring Web Tethers has a maximum working load limit of the following:
88751 - Dual D Ring Web Tether 2-1/4", 10PC (2 lbs. , 0.9kg)
88752 - D Ring Web Tether 2-1/4", 10PC (2 lbs. , 0.9kg)
88753 - D Ring Web Tether 3-1/2", 10PC (5 lbs. , 2.26kg)
GEARWRENCH Self Sealing Tape has a maximum working load limit of the following:
88721 - Tether Self Sealing Tape (5 lbs. , 2.26kg) * If any component of the tethering systems maximum load limit is under
5lbs. (2.26kg), follow the lowest maximum load limit of any item included in the tethering system
88722 - Tether Self Sealing Tape, Extra Long (5 lbs. , 2.26kg) * If any component of the tethering systems maximum load
limit is under 5lbs. (2.26kg), follow the lowest maximum load limit of any item included in the tethering system
Installation Instructions using GEARWRENCH Seal Sealing Tether Tape 88721/88722 with
GEARWRENCH D-Ring Web Tethers 88751/8872/88753
1. Measure the tool diameter of the tool to have the tether point added
2. Cut off a strip of GEARWRENCH Self Sealing Tether Tape that is 10x the diameter of the of the tool diameter
3. Place the GEARWRENCH D-Ring Web Tether on the tool with the tab facing up & the metal d-ring loop facing the part of
the tool that would pointing toward the users body when tool is in use
4. Remove plastic backing from the GEARWRENCH Self Sealing Tether Tape
5. Wrap the GEARWRENCH Self Sealing Tether Tape around the GEARWRENCH D-Ring Web Tether, beginning the first wrap in
the indentation of the center of the nylon web, and continue wrapping the GEARWRENCH Self Sealing Tether Tape
applying moderate pressure until all of the pre cut and measured GEARWRENCH Self Sealing Tether Tape has been
wrapped around the GEARWRENCH D-Ring Web Tether.
6. After connection point is complete with the GEARWRENCH D-Ring Web Tether and GEARWRENCH Self Sealing Tether Tape
test the connection point prior to use.
GEARWRENCH Heat Shrink can be added to extended the life of your connection point and provides additional
protection for tools used in harsh environments or that are in contact with abrasives. GEARWRENCH Heat Shrink
is sold separately.
MADE IN CHINA - LIMITED 1 YEAR WARRANTY FOR MANUFACTURING DEFECTS EXCLUDING NORMAL WEAR AND TEAR
88721, 88722, 88751, 88752, 88753