Technical Description - Halfen DEHA KKT-U Notice D'utilisation

DEHA KKT-U
Identifi cation
Each universal head lifting link is iden-
tifi ed as shown: the name of the ma-
nufacturer (DEHA) is stamped into
the handle together with the applica-
tion identifi er K-A and the unique an-
chor number. The load group, the CE
mark and an operating symbol can be
found on the rear of the handle.
The application identifi er K-A denotes
that the universal head lifting link can
be used for the following two DEHA
Lifting anchor systems:
• for the DEHA Lifting anchor
system type K with the spherical
head anchor
• for the DEHA Lifting anchor
system type A with an appropriate
cast-in socket and adaptor.

Technical description

These user instructions apply to the
DEHA Universal-head lifting clutch in
connection with the instructions for
the DEHA Spherical-head lifting an-
chor system.
The system consists of the DEHA
Universal-head lifting clutch and the
cast-in DEHA Spherical-head lifting
anchors. The DEHA Universal-head
lifting clutch is manually operated.
The load groups and dimensions are
listed in the following table.
The Lifting clutch and the Lifting an-
Precast elements, especially pipes, which have previously been lifted
with the universal lifting head, may not be subsequently lifted with
the DEHA Turning and lifting link.
Dimensions of universal head lifting link
For load class Article number
1.3 6102-1,3
2.5 6102-2,5
4.0 and 5.0 6102-5,0
7.5 and 10.0 6102-10,0
15.0 and 20.0 6102-20,0
32.0 6102-32,0
45.0 6102-45,0
2
Manufacturer
Type K-A
Identifi cation
number
Before each use visually check all lifting equipment for correct
application and damage-free condition.
It is prohibited to use damaged lifting equipment.
chor must both be of the same load
group. If these (including the recess
former) are used to specifi cations, the
geometric properties ensure incorrect
combinations are not possible. All
work-safety regulations must be ob-
served, particularly the European ma-
chine guideline (MD) 2006/42/EC
and the German VDI/BV-BS 6205.
„Transportanker und Transportanker-
systeme für Betonfertigteile".(„Trans-
port anchor and Transport anchor sys-
tems for precast concrete elements").
Order no. Weight a
0738.010- [kg] [mm]
00001 0.9 47
00002 1.4 59
00003 3.4 70
00004 9.1 88
00005 21.0 106
00006 47.0 172
00007 59.0 179
Assembly Instructions
CE-mark
Load group
Operating
icon
t
b c g h
[mm] [mm] [mm] [mm]
75 20 71 11
91 25 86 16
118 37 88 21
160 50 115 30
180 75 135 41
272 100 189 52
349 100 192 52
© 2015 HALFEN · INST_KKT-U 01/15 · www.halfen.com
Manufacturer
Type K-A
Identifi cation
number
b
a
h
t l m
[mm] [mm] [mm]
12 188 7.0
14 230 8.5
16 283 10.0
25 401 14.0
30 506 21.0
40 680 28.5
40 676 28.5