emerio FC-123454 Mode D'emploi page 7

BEFORE USE
1. Please make sure that the appliance has been installed well and check whether the battery power is
enough.
2. Add the clean water into the clean water tank.
A: clean water tank; B: dirty water tank
OPERATION
1. Presse the on/off buttons for 1~2 seconds to let the appliance work, which shall wetten the rollers.
2. Hold the handle and move the appliance on the hard floor and do the mopping.
3. Press the on/off button again to turn off the machine.
Note: if you want to add some cleaning agent in the clean water tank, please use just a little low-foaming or
non-foaming cleaning agent, and mop the floor dry later.
CLEANING AND MAINTAINANCE
1. Use only a soft moist cloth to clean the outside of the unit. Do not allow any kind of liquid to enter the
unit.
2. Do not use aggressive chemicals or abrasives.
Roller cleaning:
1. When the clean is finished, empty the dirty water tank, and add 100ml~150ml water in the base and then
rest the appliance on the base to work another 3 minutes to do the self cleaning of the rollers.
2. Take off the rollers and dry them on the base.
3. Rollers can also be cleaned in a washing machine, but with the water temperature lower than 45℃.
4. We suggest to clean the rollers every time after use.
How to detach and install the rollers:
Detach: hold the roller handle (A) at the side and then rotate to take it out, please refer to below picture:
- 6 -