Alarm Mode; To Set The Alarm; To Set The Alarm Type - Coby CSMP162 Mode D'emploi

Alarm Mode

To set the alarm

The clock on your speaker system includes a dual alarm,
which can be set to two different wake times. The alarm
can be set at any time, even during audio playback. To set
the alarm:
1. Press and hold the SET pad until the hour display and
'A1' begin to flash.
2. Select the alarm hour using the [ + ]/[ – ] controls.
Press the SET pad to confirm selection. The minute
display will begin to flash.
3. Select the alarm minute using the [ + ]/[ – ] controls.
Press the SET pad to confirm selection. The alarm
volume setting will begin to flash.
4. Select the alarm volume using the [ + ]/[ – ] controls.
Press the SET pad to confirm selection.
5. The hour digits and 'A2' (denoting Alarm 2) will begin
to flash. Repeat steps 2-4 to set Alarm 2.

To set the alarm type

You can select the alarm to wake you with a standard
'BEEP', AM/FM radio, or playback from your iPod. To
choose an alarm type, at least one alarm must be set and
activated. (Screen will display A1/A2.) The system speaker/
radio must be turned off.
Page 10
A1 denotes Alarm 1.
Coby Electronics Corporation