Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DONGLE USB WMBUS AMR - Mode d'emploi - User guide V1.3
Command
8 characters to be sent:
"I"
0x49
«F»
0x46
"U"
0x55
115200bps
Frame filtering activation
"H"
0x48
Manufacturer ID used for
"D"
0x44
Upper WMBUS filtering
"J"
0x4A
Lower WMBUS filtering
"K"
0x4B
4.2. Receive data via the dongle USB AMR
Data can be received via the demo software from Adeunis RF, the «ARF Collector.» This software is freely available upon request Adeunis RF. this
software can be used for demonstration purposes only.
Data, to be used, must be received via specific software developed or bought by the user.
4.3. Wireless M-Bus DATA format
In each operating modes, the data format are the same. We are providing in the following lines, a short summary of the packet data format.
The link layer use IEC 60870-5-2 format class FT3..
Parameter
2 ID
6 Address
C field
Communication Group
"3"
"0"
"1"
filtering
address
address
Description
WMBUS Group
8 chars
to be
sent for
Settings of the manufacturer ID (first 2
manu-
characters) and manufacturer address (last 6
facturer
characters).
ID +
[ID1][ID2][@1][@2][@3][@4][@4][@5][@6]
WM-
BUS
address
C Field to be set in WMBUS frame
0x33
Set the USB bit rate
Filtering Group
0x30
Not Activated
0x31
Activated
2 char
to be
sent for
manu-
facturer
ID
6 char
to be
sent for
high
WM-
BUS
address
6 char
to be
sent
for low
WM-
BUS
address
Default value
Each ARF Dongle USB
AMR address in unique
when using the default
ARF manufacturer ID
0x44
"3": 115200bps
"0": filtering deactivated
0x0646 (ARF manufacturer
ID)
0xFFFFFFFFFFFF
0x000000000000
Page
22
of 23
Publicité
Table des Matières
