3-GENERAL DESCRIPTION OF THE SYSTEM
3-GENERAL DESCRIPTION OF THE SYSTEM
ATTENTION! Installation must ONLY be carried out by specialised personnel.
The manufacturer will not be held responsible for injury to persons or damage to property or in the event of failed
operation.
The Wi-Fi module uses the domestic Wi-Fi network; ensure there is enough coverage in the place of installation.
1
Connection of the Wi-Fi module to the stove
2
Power supply of the Wi-Fi module
3
Informs you that the Wi-Fi module is powered on
4
Informs you that it is connected to the remote server
5
If steady, this reports the configuration mode and activation of the access point for the connection to the local computer.
If flashing, this means that the configuration mode is being activated, but it has not been activated yet.
6
If steady, this means that your Wi-Fi network has been successfully accessed. If flashing, this means that the module is
trying to access the local network.
7
Button to reset the system and activate the configuration mode.
46
46
1
3
4
2
5
7
6
EN
EN