Hardware Installation - IOGear GUD3C02 Guide De Démarrage Rapide

Hardware Installation

STEP 1. Connect the Laptop AC Adapter to the USB-C charge port on the docking station*
STEP 2. Connect the video output that you wish to use (HDMI, mDP or VGA)**
STEP 3. Connect additional USB peripheral devices as needed to the 3 USB Type-A ports
STEP 4. Insert the SD/MMC or Micro SD cards to the card reader slot
STEP 5. Make sure the laptop is turned on, connect the USB-C cable from the docking
station to the host laptop computer USB-C port
*Note: Please plug in the USB-C charger to USB-C Power charging port before using the
dock as plugging or unplugging of the USB-C charging port will may cause the momentary
disconnect on USB devices connected to the docking station.
**Video Resolution Chart
Operating System
Windows
Mac OSX
Chrome OS
Operating System
Windows
Mac OSX
Chrome OS
Operating System
Windows
Mac OSX
Chrome OS
Dual Video Outputs
Windows
Mac OSX
Chrome OS
Single Video Output
Single Video Output
Single Video Output
HDMI
up to 1920x1200 @60Hz
N/A
N/A
HDMI
up to 3840x2160 @30Hz
up to 3840x2160 @30Hz
up to 3840x2160 @30Hz
mDP
up to 3840x2160 @30Hz
up to 3840x2160 @30Hz
up to 3840x2160 @30Hz
VGA
up to 1920x1200 @60Hz
up to 1920x1200 @60Hz
up to 1920x1200 @60Hz
mDP
up to 1920x1200 @60Hz
2
N/A
N/A