Hardware Installation - IOGear Thunderbolt 2 Guide De Démarrage Rapide

Hardware Installation

1. Plug the included AC power adapter into the DC-In port of
the GTD720.
2. Using the included Thunderbolt cable, connect your Thunderbolt enabled
Mac or PC to one of the Thunderbolt ports of the GTD720.
3. Press the Power Switch on the back of the docking station. The Power-On
indicator will light up "white" when docking station is powered on.
Ports and Operation
Front
1. Connect a mini digital optical (mini TOSLINK) audio cable for an external
active speaker system. The Line-Out port supports optical signal for
higher quality sound playback.*
2. Connect a mini digital optical (mini TOSLINK) audio cable for recording.
The Optical Audio Line-In port supports optical signal for higher quality
sound editing.*
3. Connect any USB compatible devices here. This USB port is
compatible with USB 3.0, 2.0 and 1.1 devices.
4. Dedicated fast USB charging port to fast-charge tablets or smartphones.
HDMI
DC12V
1
2
HDMI
DC12V
2 3 4