General Guidelines - Toolland WHW250 Mode D'emploi

Safety Instructions for Servicing
Wear safety goggles and heavy-duty leather gloves during
maintenance.
When replacing a line, do not use a thinner or longer line than
recommended by the manufacturer. Do not link multiple lines together.
Have the device repaired by a qualified service person using only identical
replacement parts. This ensures that the safety of the device is maintained.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Keep this manual for future reference.
4. Features
 solid gear construction
 black electrostatic discharge coating finish against rusting
 internally lubricated drum and pinion gear bushings
 moulded handle for smooth rotation
 formed reinforcements in frame for added strength.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 frame
2 pawl
3 shaft
V. 02 – 11/05/2017
WHW250
4 drum
5 handle
6 mounting surface
7 ©Velleman nv