Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Functions
10.1 Control panel
The MQ pump is operated entirely by means of the
control panel. See fig. 1. The control panel offers the
possibility of starting/stopping the pump. The pump
settings and operating condition are indicated by
indicator lights. See fig. 17.
Fig. 17 Control panel
The functions of the control panel are described in the table below:
Illustration
1
2
3
4
14
Description
Indicator light (red):
When the indicator light is on, the pump is on standby.
On/off button:
The pump is started/stopped by means of the on/off button.
The on/off button can also be used for manual resetting in case
of an alarm condition:
• press once for resetting and
• press once more for starting.
Indicator light (green):
Indicates that the pump is ready for operation.
When the indicator light is on, the pump will start automatically
when water is consumed. After-run time depends on the flexibili-
ty of the discharge pipe, but will be at least 10 seconds.
Pump on (green):
The indicator light is on when the pump is running.
Publicité
Chapitres
Table des Matières
