HQ EL-ES01HQ Mode D'emploi page 2

Introduction:
This smart TV power saver is designed to cut down the standby power consumption of
your connected TV in order to reduce the energy costs and therefore save money. This
power saver will automatically turn off the power after you've put the TV in standby
mode. The EL-ESO1HQ is very easy to operate, since it works with your current
remote control for your TV, SAT, HiFi or DVD player.
Operation:
Manual Reset/ON/OFF
switch
1) Plug in your TVs power lead into the EL-ES01HQ
2) Plug the EL-ES01HQ into the wall socket or power board (ensure the wall socket
is turned on), press the ON/OFF switch on the remote control to activate the
EL-ES01HQ switch pilot lamp
3) Place the IR signal receiver in front of your TV set
Specifications:
Voltage:
Frequency:
Max. Current:
Max. Load:
Switch Function:
Plug / Input:
Socket/ Output:
Outlet:
Stand By Power:
Energy saved per year:
ENGLISH
Operation indicator light
230 ~ 240vac
50hz
10a
2400w
IR
Schuko
Schuko
1
< 0.25w
0.018KWH*20H365D=131.4KWH
2
IR signal
receiver