Safety Instructions; Possible Misuse - strapex STR 67 Mode D'emploi

3
jklsfjklsdj
lksdfjkl
jkljsdllkjjkljsd
fkljjklkjkljsdafj
asdfjklkjjkljklj
ksldafkjkljkl
jkljklkljsdafjlkj
jkljjkljklkljljlk
6 8 10
4 12
2 14
max.6 bar 0 16
11.11

SAFETy INSTRUCTIONS

Inform yourself!
Read the operating in-
structions carefully.
Protect yourself!
When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).
Warning:
Strap will snap forward!
When cutting the strap,
hold the upper portion
and stand safely away
from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with
the strap while it is ten-
sioned. The strap could
break!
Caution:
Danger of squeezing!
Do not put your fingers
into the tension wheel
area.
Caution:
Only strap packed
goods!
Do not put hands or other
parts of the body bet-
ween the strap and the
package during the strap-
ping process.
Do not exceed the air
pressure!
Do not exeed the recom-
mended air pressure
Use safety coupling!
For connecting the air
hose to the tool, use only
a safety coupling
Original
Strapex
Original
Strapex
Use for the intended purpose
The tool is intended for strapping heavy round
packages, bundles of sectional steel, pipes etc. (tog-
ether with sealer).
This tool was designed and manufactured for safe
handling during the strapping operation.
The tool processes steel straps only.

Possible misuse

The use of plastic straps is not possible.
Strapex STR 67
Do not use a bottled
air or gas source!
Do not operate tis tool
by usining a bottled air
or gas source
Caution:
If work is carried out
using a spring balancer,
only a spring balancer
that complies with the
safety regulations may
be used.
Original Strapex seals
must be used exclusi-
vely.
Original Strapex spare
parts must be used
exclusively!
Not using original spare
parts will dissolve the
warranty and the liability.
11