Toro 51464 Mode D'emploi page 3

Safety/Instruction Decals
Important: Safety and instruction decals are located near areas of potential danger. Replace damaged or lost
decals.
Assembly
1. Insert the cables into the black center section.
Note: Ensure that the cables are not twisted.
2. Connect the black center section to the motor
housing.
3
106-9826
3. Install the upper handle, as shown, using the long
bolt and finger nut.
m–7213
Note: You can adjust the upper handle to a position
that is comfortable and balanced for you.
m–7214
3350-837
m–7215