Technical Data - Olympia G 3120 Mode D'emploi

l Paper Guide
7
6
1. Release the lock (7) for the paper
guide (6).
2. Slide the paper guide (6) carefully on the
rail.
Note: Do not slide the paper guide (6) if the
lock (7) has not been released.
3. Position the paper guide (6) with the aid of
the measuring units and systems (5).
Note: The paper guide (6) can be adjusted
continually in the rail.
4. Lock the paper guide (6). The paper guide
serves as a stopper for the material to be
cut.
l Technical Data
Cutting length (mm)
G 3640
G 4640
G 3120
G 4420
G 4415
G 3115
8
360
460
310
448
448
310
l Adjusting the Guillotine
Arm
10
After a period of time in use, the guillotine
arm (1) becomes too loose and no longer re­
mains in position of its own accord. The guillo­
tine arm (1) must then be readjusted.
1. Tighten the screw (10) slowly, using an
appropriate tool.
Note: Check whether the guillotine arm re­
mains in position, taking the safety information
into account. If the guillotine arm is too difficult
to move, loosen the screw (10) slowly, using
an appropriate tool.
Cutting capacity Sheets (80 g / m²)
G 3640
G 4640
G 3120
G 4420
G 4415
G 3115
40
40
20
20
15
15