Stopping Playback; Ejecting A Disc - Esoteric RZ-1 Mode D'emploi

Suspending playback temporarily
(Pause mode)
Press the PAUSE button (J) during playback to stop playback at
the current position. To resume playback, press the PAUSE button
(J) again.

Stopping playback

Press the Stop button (L/H) to stop playback.

Ejecting a disc

In CD/SACD mode, when playback is stopped, press the Eject
button (L/H) to eject a disc.
You can also eject the disc when in modes other than CD/SACD
mode.
Precaution when reinserting an 8-cm CD after ejecting it.
Remove the disc completely before reinserting it into this unit.
If you push it back in without removing it first, the disc could
become stuck in the unit.
If a disc cannot be ejected, put the unit in standby (turn the power
off) and then turn it on again, or press the Eject button (L/H) for
2 seconds or more.
Skipping to an earlier or later track
During playback
Press a Skip button (. or /) repeatedly until the desired track
is selected. The selected track will be played from the beginning.
< If the . button is pressed once during playback, the track being
played will be played again from the beginning. To return to the
beginning of the previous track, press the . button repeatedly.
However, If it is pressed within one second from the start of the
track, playback returns to the start of the previous track.
When playback is paused
Press a Skip button (. or /) repeatedly to select the track you
want to hear. Then, press the PLAY button (G) to start playback of
the selected track.
Searching for a part of a track
During playback, hold down a SCAN button (m or ,) to scan
backwards and forwards. Press the PLAY button (G) to restart
playback at the desired location.
Repeated presses of the SCAN buttons (m or ,) changes the
scanning speeds.
1 2 3
Slow
4 Normal playback
Fast
17