Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TABLE oF REFERENCE ToRqUES
(Torque measured at low rotation speeds below 20 rpm)
Material
Permitted max.
Dimensions
rivet
tightening torque
rivet nut
nut
(Nm)
Stainless steel (INOX)
15.7
M12
Steel (Steel)
14.8
(SAE 1/2-13)
9
Aluminium (ALU)
12.5
Stainless steel (INOX)
M10
Steel (Steel)
11
(SAE 3/8-16)
6.2
Aluminium (ALU)
Stainless steel (INOX)
11.8
M8
10.8
Steel (Steel)
(SAE 5/16-18)
Aluminium (ALU)
6
Stainless steel (INOX)
11.2
M6
Steel (Steel)
10
(SAE 1/4-20)
5.6
Aluminium (ALU)
10.4
Stainless steel (INOX)
M5
Steel (Steel)
9
(SAE 10-24)
4.5
Aluminium (ALU)
Stainless steel (INOX)
5.8
M4
4.7
Steel (Steel)
(SAE 10-32)
Aluminium (ALU)
1.3
3.8
Stainless steel (INOX)
M3
Steel (Steel)
2.5
(SAE 8-32)
1.0
Aluminium (ALU)
EN
Recommended
Recommended
minimum tightening
minimum tightening
torque of the drill (Nm)
torque of the drill (lbf.ft)
28.3
20.9
26.6
19.6
16.2
11.9
22.5
16.6
19.8
14.6
11.2
8.3
21.3
15.7
19.5
14.4
10.8
8.0
20.2
14.9
18.0
13.3
10.1
7.4
18.8
13.9
16.2
11.9
8.1
6.0
10.5
7.7
8.5
6.3
2.4
1.8
6.9
5.1
4.4
3.2
1.9
1.4
Table 2
36
III. Safety Instructions
y Keep hands and all body parts in a safe place at a suffi-
cient distance from the work area.
y Make sure that there is no loosely hanging clothing,
chains, long hair, gloves, etc. in the vicinity of the work
area since they could be caught/snagged.
y Do not use the rivet drill attachment for
fastening electrical cables because the
insulation on the wires could become
damaged and life-threatening voltage
could be conducted to the metal parts of
the tool, which could lead to injury of the
user by electrical shock.
y Long term use of the rivet drill adapter
may result in the body of the rivet drill
adapter becoming hot, pay increased
attention.
Iv. Cleaning and
maintenance
y Remove the rivet drill adapter from the drill before cle-
aning and maintenance The rivet drill adapter is supp-
lied factory lubricated. After installing 2000 rivet nuts/
blind rivets it is recommended to lubricate the rivet drill
adapter with machine lubricant (machine Vaseline).
y Do not use any organic solvents or corrosive cleaning
products for cleaning. Prevent any water or other
liquids from entering the rivet drill adapter.
y For safety reasons and for reason of exercising the
warranty, exclusively original parts of the manufacturer
may be used for repairs.
SToRAgE
y Store the rivet drill adapter in a dry place, out of the
reach of children. Protect it against rain, moisture
and the ingression of water and against temperatures
exceeding 50 °C.
37
WARRANTy AND SERvICE
y The product is covered by a 2-year guarantee from
the date of sale according to law. If requested by the
buyer, the seller is obliged to provide the buyer with the
warranty conditions (rights relating to faulty perfor-
mance) in written form.
y Free warranty repairs relate only to manufacturing
defects on the product (hidden and external) and do
not relate to the wear of the product as a result of
excessive load or normal use or damage of the product
caused by incorrect use.
EN
Publicité
Table des Matières
