König SAS-DUMMYCAM25 Mode D'emploi page 2

ENGLISH
Introduction:
CCTV dummy camera in mini-speed dome housing. Professional design for preventive
security. With built-in flashing LED. Adjustable mounting bracket is suitable for wall or ceiling
mounting.
Inserting the batteries:
Turn the plastic dome counter-clockwise to gain access to the battery compartment. Take off
the plastic dome.
Close
Open
Place 2x AA 1.5 V batteries in the battery compartment, ensuring that it conforms to the
correct polarity marking inside the battery compartment. After placing the battery, turn the
plastic dome clockwise to close it.
Close
Open
Adjusting the bracket:
The bracket can be adjusted to different angles. The bracket can be mounted to the ceiling or
the wall. Loosen the screw in the bracket and adjust the angle. Do not forget to tighten the
screw after the angle is adjusted.
2