CDVI BS602 Manuel D'installation page 2

INSTALLATION MANUAL
BS602
Uninterruptible PSU
PRODUCT PRESENTATION
Regulated PSU.
7 A/H battery included.
Polycarbonate casing.
Primary and secondary inputs
protected by fuses.
VO: fi re-retardant.
Input voltage: 230V ± 10%, 50/60 Hz.
Power consumption: 0.25A.
Output: 12V dc regulated, uninterruptible.
Maximum load current: 2A (nominal), 2,5A (peak).
INSTALLATION
Do not use the central contact on the 230V
terminal block.
When mounting on a wall, use the screw
holes at the four corners of the casing.
Pass the wires through the hole designed
for this purpose.
Put the battery in the casing.
Connect the wires of the battery.
- Red wire: + terminal,
- Black wire: - terminal.
TERMINAL BLOCK
OUTPUTS
+
+
-
-
1
2
COMPLIANT WITH EUROPEAN STANDARDS
EN 55022 EN 61000-4-2
EN 61000-3-2 EN 61000-4-3
EN 61000-3-3 EN 61000-4-4
This product must be installed in accordance
with the local safety standards.
cdvi.com
2
cdvigroup.com
VOLTAGE
+12V dc
+12V dc
0V
0V
230V ac
230V ac
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11
WEEE & RoHS
IP30
Secondary
3.15A Fuse
+ + - -
outputs
Primary
500mA Fuse
230V ac
CE certifi cation
0°C to +40°C
Do not adjust the factory-set
potentiometer
Position the PSU
as on the left,
with the label
horizontal.