Features; Assembly - Ryobi TEK4 RP4050 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Battery ........................................................................4 Volt
Detection Method ....................................................... Edge
*IP Rating: Specifies the environmental protection the product enclosure provides. An IP Rating of 54 denotes protection against harmful deposits of dust and
protection against water sprayed from all directions. The water resistance rating applies only when the battery cover is installed.
KNOW YOUR STUD SENSOR
See Figure 1, page 9.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

Depth Selection .................................1/2 in., 1 in., 1-1/2 in.
Water/Dust Protection .......................................IP54 rated*
DEPTH SELECTION
Choose the depth of detection that is closest to the depth
you want to measure. Accuracy of edge detection will be
best when the actual depth being measured matches the
depth selected on the unit.
DETECTION TYPES
The stud sensor can locate wood or metal studs and joists
and live AC wiring.

ASSEMBLY

PACKING LIST
Stud Sensor
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
5 — English