ZIBRO CLIMA P7000 Manuel D'utilisation page 28

A
B
A A
4
28
2001 P7000 / P9000
INSTALLATION
1 On purchasing this air conditioner, you received two boxes containing:
the air conditioner
the connection set, consisting of:
2 window attachments
1 connector
1 water drainage hose
1 air exhaust hose
2 Remove all the packing material and keep it together with the boxes for
storage and/or future transport.
3 Place the air conditioner on a level and stable floor, and ensure that there is
adequate circulation by leaving a gap of at least 50 cm all around the
machine.
4 Insert the plug into an earthed socket (the machine will emit an audible
signal).
5 Your Zibro Clima is now ready to use.
OPERATION
1 Press the ON/OFF button
illuminate on the control panel and the machine will emit an audible signal.
2 Ensure that the water reservoir is empty and inserted correctly. You will hear
an audible signal and a red light will illuminate when the water reservoir is
full ´. First empty the reservoir (fig. A).
You can now select from the three functions:
to activate the air conditioner. A green light will