OXO ColorZoom 180 ARC Mode D'emploi page 8

5-SLAVE
MODE
SLAVE MODE
ON
7-SETUP
FAN MODE
AUTO
DIM CURVE
000
NO DMX
HOLD
DISPLAY
DP BACKLIGHT OFF
05 MIN
DP KEY LOCK
ON
NO DMX DP FLASH
ON
User Manual - COLORZOOM 180 ARC
To choose SLAVE MODE
if ON, product act as a Slave
See «Master/Slave Mode» topic here after
To set up product feature
If ARCHI then fan is OFF and power is -40%
If STUDIO then fan is OFF and power is -25%
If AUTO then fan is regulated by temperature and power
is at max
To change dimmer curve adding a time on fade out
of 0s / 1,5s / 3s / 4s / 5s.
Define product behaviour after a DMX break
HOLD : keep the last DMX value
BLACKOUT : Go to dark
MACRO : Go to the last Macro used.
To set up display options
Define the time before display goes dark
10s / 30s / 1min / 5 min / NEVER
To enable unlock code :
if OFF : After a delay (define by display DP BACKLIGHT
OFF), display goes OFF and autolock, to unlock push
MODE during 3s. To lock manually push MODE during 3s.
if ON : After a delay (define by display DP BACKLIGHT
OFF), system autolock, to unlock push MODE and in
séquence «Menu / up / down / enter». To lock manually
push MODE during 3s
if ON, display flash if no DMX
V1.1 09/2019 8/36