Beper 90.496N Manuel D'instructions page 11

Deep Fryer Use instructions
SECURITY AND USE ADVICE
This appliance has been manufactured to fry food, only for domestic and household use,
and does not be used for other purpose, cannot be modified or badly manipulated.
Do not switch on the fryer if damaged ; contact the manufacturer or the assistance service
authorized by the manufacturer.
Plug the fryer only to a wall socket making sure that is earthed.
Before use, make sure that the mains voltage corresponds to the data specified on the
label of the fryer.
Do not pull on the cord to unplug it from the socket.
The cord must not touch or be near hot parts of the fryer, heater source or cutting angle.
Do place the fryer near heater source or water.
Do not let the cord pending from the surface where the fryer is placed thus that could be reached by
children or avoid movement for a good use.
Before use, completely clean every parts of the fryer. Make sure that they are completely dry before
filling with oil or fat.
Always respect the MIN and MAX level on the oil container wall.
When using it the fryer is hot, do not touch external parts of it.
Do not put the hands on the filter when the fryer is on, the oil steam can be very hot.
When using it, some hot steam can come out from the fryer or when open the lid, make sure not to
burn yourself and keep hands and face away from the steam.
Do not move the fryer when hot oil is inside to prevent from serious burns. The fryer can be moved
only when it is cooled.
Keep away from children.
The fryer can be used only when the oil tank is full of oil or molten fat. Only use oils or fat recommen-
ded for fryer (read carefully indications on oil bottle).
Oil and fat are flammable substances, unplug immediately the cord from the socket in case of fire.
Unplug the fryer from the socket outlet for cleaning or if not used.
Empty the oil tank only when the fryer is cooled.
After use, set switch temperature OFF and unplug the fryer from the socket. Make it cooled.
DESCRIPTION
1 – Operation light indicator
2 – Switch on/off and temperature setting
3 – Non-stick tank
4 – Oil MIN and MAX level mark
5 – Lid
6 – Filter
7 – non-skid feet
8 – Cord supply
9 – Basket
10 – Basket handle
11