babymoov Turbo Steam+ Notice D'utilisation page 11

ADJUST THE STERILISER CONFIGURATION
You can adapt the configuration of the tree depending of the accessories you need to sterilise. The central trunk (f) and all
the branches are removable so that you can get the white base (i) alone to sterilise big accessories such as breast pumps.
- Remove the longer nozzles by unfastening them in the anti-clockwise direction. Apply the reverse procedure to fasten.
- Remove the shorter nozzles by unfastening them in the clockwise direction. Apply the reverse procedure to fasten.
- Remove the hooks by raising them upwards while pulling towards you.
MAINTENANCE
Cleaning
- Never submerge the appliance in water, and don't fill it right up with water.
- Use a slightly damp cloth to clean the inside and outside.
De-scaling
Do not use any de-scaling products.
Depending on how hard the water used is and after a certain period of time, a layer of scale may build up in the tank. In order
for the sterilizer to work properly, the tank needs to be de-scaled regularly.
Proceed as follows: mix 100 ml hot water with 100 ml white vinegar and pour it all into the tank (k). Leave to act for 30 minutes
then empty the appliance. Then use a damp cloth to clean it.
TURBO STEAM + ELECTRIC STERILISER • Instructions for use
11