Basic Operations - Pioneer FH-S700BS Mode D'emploi

TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.

Basic operations

Purpose
End a call
Reject an incoming call
Switch between the current caller
and a caller on hold
Cancel a caller on hold
Adjust the volume of the caller's
voice (When private mode is on,
this function is not available.)
Turn the private mode on or off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Operation
Press
Press and hold
Press the M.C. dial.
Press and hold
Turn the M.C. dial during the call.
Press BAND/
to activate the voice recognition mode.
- 18 -
.
when a call is received.
.
during the call.
to 6/ ).
.
to 6/ ),