König KN-BM60 Mode D'emploi page 6

Selecting the Wi-Fi router
6
Select the Wi-Fi router of your choice in the screen (see Figure 9).
Then select the tab
Figure 8
IP baby and child monitor connects with Wi-Fi router
7
Wait about 1-2 minutes. If the IP baby and child monitor is successfully connected to
the Wi-Fi router, the status LED will become orange.
Otherwise the status LED will become a flashing red light. If the setup is not
successful, please go back to Step 1 and try again.
8
If successful, select the tab:
Please enter a camera name and password for security and select the tab:
(see Figure 13).
The IP baby and child monitor will automatically enter the viewing screen (see
9
Figure 14).
to enter next step (see Figure 10).
Figure 9
(see Figure 11), and follow the instructions.
6
ENGLISH
Figure 10