LENCO BMC-080 Mode D'emploi page 9

H. Sing with mobile devices and play music
1. Open any karaoke APP or select music file from your mobile device's
music player.
2. Adjust microphone's volume, echo, treble and bass as you desired by
slightly pushing up and down the volume/echo/treble/bass buttons
accordingly.
3. Now you can start singing with the mobile devices or;
4. If you want to use the device as a Bluetooth speaker, turn off volume
on microphone, and then play music from your mobile devices.
Note: Keep a proper distance between microphone and mobile devices to
avoid signal interference.
I. AUX IN Function
1. In power ON mode, connect device's "AUX IN socket (10)" with an
external device's "Earphone/AUX/LINE" Output through the Audio
Cable (Provided).
2. The device will switch to "AUX In" mode automatically from
Bluetooth mode.
3. Open any karaoke APP or select music file from your mobile device's
music player and adjust your device accordingly.
4. Adjust microphone's volume, echo, treble and bass as you desired by
slightly pushing up and down the volume/echo/treble/bass buttons
accordingly.
5. Now you can start singing with the mobile devices or;
6. If you want to use the device as a Bluetooth speaker, turn off echo
and volume, and then play music from your mobile devices.
7. Disconnect the Audio cable when it is done.
J. Low Power Reminder And Power Off
1. The device will send tones by every minute. When you heard this
reminder sound, please connect the device with USB power for
charge if you still want to use the device.
2. If not, the device will power off automatically when the battery is
keeping low energy level in some minutes.
3. In this case, the device cannot be turned on, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery
has not enough energy.
4. Press the "
enough energy if you want.
(8)" button to turn on the device after charged with
9