Replacing The Lamp - VESTEL VHDA55CS Mode D'emploi

7.2

Replacing the lamp

• Only a qualified electrician may replace the lamp.
• Unplug all power connections before opening the appliance.
• Risk of burning! Always let the lamp cool down before replacing it.
• Always use gloves or a cloth to avoid direct contact with your hands. Direct
contact may reduce the lifespan of the lamp.
To replace the lamp:
1. Make sure you switch off the appliance.
2. Disconnect the power supply from the wall socket.
3. Press the filter lock and remove the filter.
4. Replace the lamp. Make sure to use the following lamp: AC 220V-240V~50Hz
Max. 2W LED; ILCOS D code: DBS-2/65-H-120/33.
5. Place the mesh filter.
6. Connect the power supply to the wall socket.
51 | VESTEL VHDA55CS-VHDA80CS