Tristar BL-4407 Mode D'emploi page 9

ENGLISH
Important Safeguards
The following basic safety precautions apply when using electrical appliances:
1. Read all instructions before first use.
2. To protect against electrical shock, do not immerse the mains cord, the plug, or th motor
housing in water or any other liquid.
3. Close supervision is necessary when any appliance is operated near or by children.
4. Unplug the unit from the outlet when not in use, assembling and disassembling, an before
cleaning. Make sure the motor stops completely before disassembling.
5. Make sure the supply power is the same as indicated on the rating plate.
6. Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions
or is damaged in any manner.
7. This appliance is intended for household use only. Do not use outdoors.
8. Do not allow the cord to hang over the edge of a table or counter, or touch hot surfaces.
9. Do not place the unit oil or near a hot gas or electric burner or a heated oven.
10. Do not use the appliance for other than its intended use.
11. Never touch moving parts.
12. The use of accessories not recommended by the manufacturer may cause fire electrical
shock, or injury.
13. Never turn the power on unless the appliance is fully and properly assembled.
14. Do not put fingers or other objects into the machine while it is in operation.
15. Do not run the machine continuously for longer than 3 minutes at a time. Turn o the switch
and let it rest for at least 1 minute to cool down the motor. If not, the motor may become
damaged.
16. Do not overload the appliance at any time.
17. Handle the metal blade carefully, they are extremely sharp.
18. Never put your fingers, a fork, spoon or other utensil into tile jug while in operation.
19. Do not use abrasive cleaners or scouring pads oil the appliance.
20. Avoid using this appliance to process ingredients hotter than 80° C (127° F).
1. Soft plastic lid with feeding hole
2. Jug
3. Blade and base
4. Motor housing with non-skip feet
5. Pulse/0/1/2 knob
Before using for the first time, wash all parts and attachments in hot soapy water,
rinse and (try thoroughly.
Assemble:
1. Put the motor housing on a steady and even surface
2. Screw the blade base with blade and water-proof ring to the jug firmly
3. Put the jug on the top of the coupling and turn to connect it with the motor housing.
Carefully handle the blade because it is extremely sharp.
4. Place the Iid firmly on the jug. Now this unit is ready for use.
Note: never use turn on the appliance until it is properly assembled
Pls note, that the blender will not operate without the jug locking onto the base.
How to use
9