Connecting To The Pc - Odys DigiEye I Manuel D'utilisation

7
Confirm the preset folder
name and click Next.
9
Install VideoImpression and remove the CD-ROM from the
CD-ROM drive.

4.2 Connecting to the PC

1
Connect the USB plug of the PC camera to a free USB socket on
your computer.
2
The Windows operating system recognizes the new hardware
and automatically installs the required driver. After completing
this procedure, you can operate your PC camera using the
following application programs.
3
Place your PC camera on a level surface and point the lens at
the subject to be recorded.
8
Click Finish to complete the
installation.
7