Num'axes NGPIEACC033 Guide D'utilisation page 16

Power
management
Standard
condition
Output cable
Thread
Full charge time
•
Operation
Turn on the solar panel
Press the ON/OFF, one red indicator light lights up. This
means that the solar panel has been successfully turned on.
Turn off the solar panel
Press the ON/OFF button, the red indicator light goes out.
This means that the solar panel has been successfully shut
down.
•
Connecting the solar panel to the trail camera
Plug the end of the solar panel output cable into the
external power port of your NUM'AXES trail camera. Press
the solar panel ON/OFF button to it switch on (the panel
switches on automatically when sunlight is detected).
Guide panneau solaire 6 V – Ind. A – Juillet 2020
1. Stops invalid charging
2. Higher than 91% output
conversion rate
1000W/m², 25°C, AM 1.5
Length: 3m / 10ft
M6
5 days (sunny days)
16/56