Check Content Of Delivery; Assembling The Armchair; Using The Armchair; Set The Lying Position - Duo Collection PONZA Instructions De Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63

Check content of delivery

NOTE!
Damage risk!
If you open the packing without due
care with a sharp knife or other pointed
tool. Then the armchair could easily be
damaged.
• Therefore please take great care
when opening.
1. Remove the armchair from the packaging.
2. Check for any visible signs of damage. If there are
any, please do not use the armchair. Contact your
retailer.
3. Check that the contents of the delivery are com-
plete.

Assembling the armchair

WARNING!
Risk of injury!
Improper use of the armchair can result
in serious injury.
• To avoid any injuries caused by
pinching, take care when moving.
1. Place the seat
of the armchair on a flat
4
surface.
2. Take the rest
and lift it over the seat.
1
3. Place the guide rail
the guide pin
on the seat.
2
4. Press down firmly from above, until the back rest
clicks into place and cannot be moved.
5. The cover
comes with a hook and loop
5
fastening. Attach the cover so that it fits tightly over
the seat.
6. Put the plug into the mains socket.
of the rest carefully on
6

Using the armchair

WARNING!
Risk of injury!
Improper use of the armchair can result
in serious injury.
• If the event of any fault with the
electrics, please contact a specialist.
Damaged electrical devices should not
be used.

Set the lying position

In this mode, you can adjust the back rest and the
foot rest on the armchair. This means you can reach
a lying position.
1. Sit in the armchair.
2. Press the button for lying position
remote control
. The back rest moves back. The
7
foot rest moves up.
3. If you do not want a full lying position, you can
select an intermediate position. To do this, press
the lying position button until you have reached the
position you want.
4. If you release the button, the back rest and foot
rest stop moving.
5. If you would like to go back to the upright posi-
tion, press the button for standing assistance

Set the standing assistance

This mode helps you when standing up from the
armchair. This makes the chair go up slightly and tip
forwards a little.
1. Sit in the armchair.
2. Press the button for standing assistance
your remote control. The armchair straightens up.
3. Stand up.
48
on your
9
.
8
on
8

Publicité

Table des Matières
loading

Table des Matières