Velleman MONCOLHA3 Notice D'emploi page 4

4. Features
• 2 x video/camera inputs
• OSD (on-screen display)
• automatic trigger function for reverse camera
• comes with: remote control, cables and mounting stand
5. Overview
Refer to the illustration on page 2 of this manual.
A sun shade
B IR sensor
C ON/OFF button
D video select button
E mode select button
F status indication
G mounting bracket
6. Installation
Refer to the drawing on page 2 of this manual.
1 monitor connector plug
2 fuse box
3 reverse cable (green)
4 +12VDC power cable (red)
The car connection should be carried out by a qualified person only.
• Choose a mounting location, depending on the purpose of the monitor.
When used to connect backing-up or parking camera(s), the driver should
have a clear view of the display. For all other purposes make sure the driver
is not distracted by images and/or sound from the system.
• Mount the mounting bracket [G] and attach the monitor to the bracket with
the 4 included screws.
• Connect the monitor connector plug [1] with the jack of the monitor.
• Connect a camera/video/DVD... (not incl.) to a video input [6][7].
• Make sure the engine is switched off.
• Connect the red +12VDC power cable [4] to the +12VDC power system
of the car. Make sure there is no power on the connection wire (remove
fuse).
• Connect the black ground cable to the car ground.
• The monitor can switch on/over to AV2 automatically when reverse gear
is selected. To enable this functionality, connect the green reverse cable
00 (07/11/2008)
MONCOLHA3
H IR transmitter
I ON/OFF button
J video select button
K menu button
L increase button
M mode select button
N decrease button
5 ground cable (black)
6 video in 1
7 video in 2
4
®
Velleman