IME Kensington K33403 Guide D'instructions page 6

Set Up Your Adapter
1 Use the tip of a pen to press the Color Selector Button, and at the same time
slide the Color-Coded Selector to match the color code for your notebook based
on the tables in "Find Your Color Code," above.
2 Using the Notebook Tips that match the color code for your notebook, try
fitting the tips into the power port on your notebook. You can try any tip that
matches the color code to find the right fit for your notebook.
For some notebook manufacturers, Kensington recommends trying one or more
tips, as shown in the following table. Remember that you can try any tip THAT
MATCHES THE COLOR CODE to find the best fit for your notebook.
For Notebook
Color Code: Voltage:
Manufacturer:
Acer Green
Compaq Green
Dell Green
Fujitsu-Siemens Green
Gateway Green
HP Green
IBM Blue
IBM Green
Lenovo Blue
Lenovo Green
Sony Blue
Sony Green
Toshiba Blue
Toshiba Green
8
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • info@ime.de • www.ime.de
Try This Tip:
17-21V D, H
17-21V E, H, I
17-21V H, J
17-21V H
17-21V D, H
17-21V E, H, I
14-17V C
17-21V L
14-17V C
17-21V L
14-17V G
17-21V A
14-17V H
17-21V B
www.ime.de
Caution! The selected tip should fit snugly, but you should not use
excessive force to insert the tip into your notebook.
3 Insert the Notebook Computer Cable into the connector on the Notebook Tip.
Connect Your Adapter
Depending on your Adapter model, you can connect to different power sources to
charge either your notebook or another USB mobile device.
Connecting to a wall outlet (all models)
Use the AC wall outlet connection anywhere a 100–120 volt or 200–240 volt
50/60Hz AC power source is available.
1 Insert the Wall Input Cable into the Wall Input Cable Port on your Adapter.
2 Insert the plug end of the Wall Input Cable into a wall outlet.
9