TP-Link Archer C7 Guide D'installation Rapide page 6

Q2. What can I do if I cannot access the Internet?
Check if the Internet is working properly by connecting a computer directly to the modem via an Ethernet. If it is not, contact your
Internet Service Provider.
Open a web browser, enter http://tplinkwifi.net or http://192.168.0.1 and run the Quick Setup again.
Reboot your router and try again.
For cable modem users, reboot the modem first. If the problem still exists, log into the Web Management page of the router to clone
MAC address.
Q3. How do I restore the router to its factory default settings?
While the router is powered on, press and hold the Reset button on the router until all the LEDs turn on momentarily.
Log into the Web Management page of the router to restore the router to factory settings.
Q4. What can I do if I forgot my Web Management password?
Refer to FAQ > Q3 to reset the router, and then use the default admin (all lowercase) for both username and password to log in.
Q5. What can I do if I forgot my wireless network password?
If you have not changed the default Wireless Password, it can be found on the product label of the router.
Log into the Web Management page of the router to retrieve or reset your wireless password.
Note: To learn more about the router, please go to the website http://www.tp-link.com to download the user guide of your router.
English
4