Operation Modes; Safety Precautions - Basic XL BXL-WS10 Mode D'emploi

I. Features
1. Weather forecast clock with temperature and humidity; selectable 12 or 24 hour format
2. Date display (month/ date/ week)
3. Year range is 2003-2052 (default is 2003)
4. Alarm function
5. Alarm with snooze function (repeat 4 times)
6. Temperature range: -20°C ~ +50°C
7. Humidity range: 20% RH ~ 90% RH
8. Max/Min temperature and humidity records
II. Operation Modes
1. Press MODE to switch time display, alarm display and calendar display mode.
2. In alarm display mode, press "SET" to enter alarm mode.
3. In calendar display mode, press "SET" to enter calendar mode
III. Setting & Function Procedures
1. Set Time
- In standard time display mode, press and hold "Set" for 2 seconds to access setting mode.
- The setting sequence is: 12/24 hour selection Hour  Minute Exit.
- Press "Adjust" to toggle between 12/24 hour formats. Press "Adjust" to set the hour and
minutes. Press "ADJUST" once, the value will increase with one step; press and hold the key for
2 seconds to increase the value with 8 steps/seconds.
2. Set Alarm
- In alarm display mode, press "ADJUST" to switch on/off alarm
- In alarm display mode, press and hold "Set" 2 seconds to set hour and minutes. Press "Adjust" to
set the hour and minutes. Press "ADJUST" once, the value will increase with one step; press and
hold the key for 2 seconds to increase the value with 8 steps/seconds.
- When ringing, press the "Snooze" key once to enter into 5 minutes snooze mode, snooze mode
is quit if any other key is pressed.
3. Set Calendar
- In calendar display mode, press and hold "Set" 2 seconds to access setting mode. The setting
sequence is Year (2003-2052)  Month  Date.
- In year setting mode, press ADJUST once, the value will increase with one step; press and hold
the key for 2 seconds to increase the value with 8 steps/seconds.
- In month and date setting mode, press ADJUST once, the value will increase with one step;
press and hold the key for 2 seconds to increase the value with 8 steps/seconds.
4. Toggle Between C/F Temperature Settings
- In standard time display mode, press "C/F" to select °C or °F.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
ENGLISH
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not
2