Cd Playback; Selection Of A Specific Track; Fast Forward And Rewind; Audio Book-Function - X4-TECH Bobby Joey Jam Box Mode D'emploi

»Choose music via your smartphone/tablet.
»After deactivating the Bluetooth function you have to set up
a new connection when using the product again, even when
both devices are still coupled. For that, keep on pressing
the Bluetooth button at the player until connection is set up
again.

CD playback

» Switch the unit on by pressing the On/Off button for a few
seconds.
» Open the CD door by pressing the four dots at the CD door.
Place a CD on the center spindle with the cover side faced
up and close the CD door.
»Choose the CD mode by shortly pressing the Mode button.
» On the LCD display the indication „READING" will be shown
for a few seconds. Due to the internal memory, CDs might
take from 30 - 60 seconds to start playback. Afterwards,
the total number of tracks and runtime will be displayed.
» Playback is started automatically. Press  to pause or
re-start a track. Press the bluetooth pairing button shortly
once to stop the playback.
» Adjust the volume by rotating the volume control to a
suitable listening level.

Selection of a specific track

During the playback you can skip with  or  to the next or
previous track.
» Select the track in the playback, stop or pause mode with
 or  and start the playback with .
» Pressing briefly on  you can skip to the next track.
Pressing this button repeatedly, you can skip several tracks
40
until the desired track number is shown on the display.
» Pressing briefly on  you will return to the beginning of the
current track.
» To skip back multiple tracks, press  repeatedly.

Fast forward and rewind

Press and hold  or  to move fast forward or backward
within the current track. The volume will be muted during
this operation.

Audio book-Function

The device is equipped with a memory function that
memorizes the last played position of the track and restarts
the playback from this exact point on any used medium.
Therefore the used medium might not start from track 1.

Repeat mode

»By pressing the Program button
between different CD playback modes.
»Press 1x (REP ONE): The current track is repeated
endlessly.
»Press 2x (REP ALL): The current CD is repeated endlessly.
»Press 3x (OFF): The current CD is played completely once
and stops playback afterwards.

Program playback

Up to 20 tracks can be programmed to be played in a specific
order.
» During playback of a track, press the Bluetooth Pairing
button once to stop the track.
»Choose the desire
»Press the Program button
you can switch
once. The word "PROG" will
41